Showing posts with label linux. Show all posts
Showing posts with label linux. Show all posts

Tuesday, 25 August 2009

Make Pasword file Immutable - A Security tip

You can add a extra layer of protection to your machine, or in my case help to prevent wannabe haxx0r brothers at the parents house from changing to extremely short passwords with a little trick that not many are aware of.

What happened to me was my brother managed to shoulder surf the admin account on my parents PC, I normally update their PC by SSH from home, but I was around there visiting and mum had described a problem so I was fixing it while we chatted, my brother was lurking around and managed to shoulder read my 12 digit alpha numeric password (have to give the guy a bit of credit there, sadly)

Anyway I became aware that files on the admin account had incorrect accessed times afterwards and then looked deeper and found that someone had been in on the account and had changed my brothers password on his account from a sensible 10 digit alphanumeric (which was dead simple to bang in with two fingers as the digits were paired on the keyboard) into a rather less safe two letter password. He claimed that a friend had helped him break into my account as "you aren't the only one that knows linux", as if I ever imagined that I was some guru, I'm a self confessed learner still! As we "discussed" this further he came clean that he had simply watched me enter the password rather than "hacked" in.

Anyway lets get onto the crux of this, after setting your passwords open a terminal and enter:
chattr +i /etc/shadow

This will make the file immutable, which means that it cannot be deleted or renamed, no symlink can be made to this file and no data can be written to the file. The immutable flag must be cleared before passwords can be changed, if you try to do so without clearing it then it will appear to change the password, but in fact it would not write to the file, without error. Meaning the new password would never be written and the old password would continue being the active one.

If a fairly knowledgeable user tries to dig into why it won't write and they try:
$ ls -l /etc/shadow
-rw-r----- 1 root shadow 1027 2009-08-25 14:37 shadow


There is nothing obviously wrong with writing to the file, to check properly you would use:
$ sudo lsattr shadow
----i------------- shadow


Here we can see the +i flag set for immutable. If we clear that with:
chattr -i /etc/shadow
The password can now be changed as normal, using sudo passwd username
and then it can be set +i again to protect it.

A little bit sneaky and just a little bit safer.

Friday, 7 August 2009

How to use OTF fonts in Ubuntu

It isn't possible to use OTF fonts directly in Ubuntu without converting them into TTF's.

If we spend just a few minutes and install FontForge and make a very small script it becomes almost trivial to do.

sudo apt-get install fontforge

Now we should make the scripts, well it is two actually but one is a small config script for FontForge and the other is just a script to convert many OTF files in one go, rather than individually. First the FontForge settings file.

cd ~/bin
touch otf2ttf.conf

Then open otf2ttf.conf in your favourite text editor and paste the following into it.

#!/usr/local/bin/fontforge
# Quick and dirty hack: converts a font to truetype (.ttf)
Print("Opening "+$1);
Open($1);
Print("Saving "+$1:r+".ttf");
Generate($1:r+".ttf");
Quit(0);

Save the file, and now lets make the script to convert many fonts in one swoop.

cd ~/bin
touch otf2ttf
chmod +x otf2ttf

Again, open this file with your prefered text editor and paste the following in.

#!/bin/bash
#
# had to enable extglob
shopt -s extglob

# this uses globbing to match fiels ending in otf/OTF
for i in +(*.otf|*.OTF)

do fontforge -script /home/subbass/bin/otf2ttf.conf $i

done

To use this now (provided that your ~/bin folder is in your path) just open a terminal where your OTF files are, and issue the command otf2ttf. It will convert 20 files in just a couple of seconds to give you an idea of speed, you can then move all the resulting TTF files into ~/.fonts


Credit to http://www.stuermer.ch/blog/convert-otf-to-ttf-font-on-ubuntu.html where I found the script before re-typing the instructions. I put it here so I don't lose it next time I need it.

Wednesday, 5 August 2009

Howto Create Split RAR Files

Lets learn how to create split Rar files

If you have a large amount of data to backup or especially to transfer it can be very prudent to use an archive that can be split into smaller parts, if one section becomes corrupted during transfer, it is far better to transfer a single 15mb file again, than an entire 10GB file, right?

Lets grab the rar program:

sudo apt-get install rar

Ok lets compress our directory of files:

To compress file(s) to split rar archive know which directory you want to compress, I'll use a fictional DVD Image folder in the home folder.

rar a -m5 -v5M -R myarchive /home/yourname/dvdimage

Let me break the above command down

rar – starts the program
a – tells program to add files to the archive
-m5 – determine the compression level (0-store (fast)…3-default…5-maximum(slow))
-v15M – determine the size of each file in split archive, in this example you get files with size 15MB (if you wanted files of 512kB size you would write -v512k)
myarchive – name of the archive you are creating
/home/yourname/dvdimage – is folder of the files you wish to add to the archive

You can also add -p to the command after a and it will prompt you for a password.

You can read the manual for more options with man rar (Press q to exit and arrows to scroll up/down)

To uncompress the archive type:

rar x myarchive.part01.rar

Or right click on file myarchive.part01.rar in Nautilus and choose Extract Here.




Tuesday, 4 August 2009

Howto make autohide panels smaller and hidden more in Gnome

Autohide panels in Gnome default to a 6 pixel strip remaining showing. I suspect this is done to "reduce confusion" which is a popular phrase from the Gnome guys, regardless its a little annoying to autohide a panel and still have it show around 20% of itself, so lets fix that.

The easiest way to do this is pop open a terminal and enter:

gconf-editor

This is quite a daunting program if you are fairly new to dabbling in the guts of OS's, and I must warn you to be a little careful in here, certainly don't go just changing stuff around to "see what happens"... Ok, no-one is that dumb... right?

Anyway, down the left hand side is a nice tree menu, navigate to:

/apps/panel/toplevels/

You should then see your panels on the left in the toplevels branch, possibly named bottom_panel_screen0, top_panel_screen0 or simply panel_0, panel_1 etc. Click on each of the panel entries and you will see the right pane populate with some "keys", locate the one auto_hide_size which is very likely set to 6 at the moment, change the 6 to a 1 by clicking on it.

The change is nearly instant and you will hopefully see the relevant autohidden panel sneak a little further offscreen, setting the value to 0 (zero) will not have the desired effect incidently so stick to 1 please.


Tuesday, 14 July 2009

Set up rxvt terminal with unicode and clickable URL's

Rxvt is a super fast unicode terminal which I have recently switched to away from Eterm for my transparent desktop terminal.

sudo apt-get install rxvt-unicode-ml

Next is to create a configuration file for it in your home folder.

touch .Xdefaults

Now paste this lot in...

URxvt*termName: rxvt

## borderless and no scrollbar
URxvt*scrollBar_right: false
URxvt*scrollBar: false
URxvt*borderLess: false

## teh transparency stuff
URxvt*inheritPixmap: true
URxvt*tintColor: white
URxvt*shading: 100

##
## These 3 lines make links clickable
##
URxvt.urlLauncher: firefox
URxvt.matcher.button: 1
URxvt.perl-ext-common: matcher,readline

## geometry and font
URxvt*geometry: 80×15
URxvt*font: xft:Terminus:pixelsize=12

## change default colors
URxvt*background: #000000
URxvt*foreground: #A8A8A8
URxvt*color0: #000000
URxvt*color1: #A80000

## URxvt*color2: #00A800
URxvt*color2: #ED254F

URxvt*color3: #A85400
## main bars in irssi
URxvt*color4: #020202
URxvt*color5: #A800A8
URxvt*color6: #00A8A8
URxvt*color7: #A8A8A8
URxvt*color8: #545054
URxvt*color9: #F85450

## Time in Irssi
URxvt*color10: #ED254F
## URxvt*color10: #50FC50

## URxvt*color11: #F2FC50
URxvt*color11: #ED254F

URxvt*color12: #5054F8

URxvt*color13: #ED254F
## URxvt*color13: #F854F8

URxvt*color14: #50FCF8
URxvt*color15: #F8FCF8

Note that some of the colours have been changed to coordinate with my current desktop theme, the original colours are commented out so you can easily revert. Also the line defining the window geometry seems to have no effect, I shall look into that and correct it when I get some time and inclination. At the moment I don't mind because the default window size is fine, and the launcher I use to start the transparent terminal I use on the desktop mainly for my screen with irssi, hellanzb and mediatomb in has the geometry set on it. the launcher command is:


rxvt -g 80x15

Last job is to tell compiz to not decorate this window, this will get rid of the title bar, borders and shadow etc.

Hopefully you have installed the advanced compiz settings (ccsm), so just open that up and go to the section for window decorations
in Effects, Window Decorations.

Add the rxvt window to be excluded from shadows and decorations, and that should see you done.



Wednesday, 8 July 2009

Logitech G9 on Ubuntu 9.04 Jaunty

Logitech G9 on Ubuntu 9.04 Jaunty


Info taken from : http://ubuntuforums.org/showthread.php?t=1092352

Firstly we need to install a couple of extra programs so open up a terminal and copy/paste the following line:

sudo apt-get install xvkbd xbindkeys
Next up we need to make a ~/.xbindkeysrc and put the next few lines into it:
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[left]""
b:6
"/usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[right]""
b:7
"/usr/X11R6/bin/xvkbd -xsendevent -text "\[Control_L]\[Page_Up]""
m:0x0 + b:11
"/usr/X11R6/bin/xvkbd -xsendevent -text "\[Control_L]\[Page_Down]""
m:0x0 + b:12
Then make another file called ~/.Xmodmap which contains the single line:

pointer = 1 2 3 4 5 8 9 6 7
Then give it a quick test by starting xbindkeys up in a terminal, the buttons should all work correctly. It could be tested in nautilus by seeing if the back button will move back a folder.

Monday, 22 June 2009

Install Samba Server on Ubuntu

Install Samba Server on Ubuntu


If you want to share files between your Ubuntu and Windows computers, your best option is to use Samba file sharing.


To install, first open a terminal window and enter the following command:


sudo apt-get install samba smbfs


We’ve got samba installed, but now we’ll need to configure it to make it accessible. Run the following command to open the configuration file, substituting your editor of choice:


sudo gedit /etc/samba/smb.conf


Find this section in the file:


####### Authentication #######

# “security = user” is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
# in the samba-doc package for details.
; security = user


Uncomment the security line, and add another line to make it look like this:


security = user
username map = /etc/samba/smbusers


This will set Samba to use the smbusers file for looking up the user list.

Create a Samba User

There are two steps to creating a user. First we’ll add that username to the smbusers file.

sudo gedit /etc/samba/smbusers


Add in the following line, substituting the username with the one you want to give access to. The format is ubuntu-usuername = “username”. You can use a different samba user name to map to an ubuntu account, but that’s not really necessary right now.

joe = “joe”


Next, we’ll run the smbpasswd utility to create a samba password for the user.


sudo smbpasswd -a


Now you can create samba shares by right clicking in Nautilus and defining the share in properties/sharing.


Monday, 15 June 2009


How to read 20 magazines for free.


You will need Firefox and an addon called User agent Switcher and configure it with an iPhone setting :

Mozilla/5.0 (iPhone; U; CPU like Mac OS X; en) AppleWebKit/420.1 (KHTML, like Gecko) Version/3.0 Mobile/4A102 Safari/419 (United States)

You can then visit http://zinio.com/iphone/ and read 20 magazines each month for free.

It gets better though, it is very simple to download these pages onto your computer using Linux, aren't you glad you dumped windows ;)

We now need the URL to the image so "copy image location" from the right click menu then using this command:

curl -O -A "Mozilla/5.0 (iPhone; U; CPU like Mac OS X; en) AppleWebKit/420.1 (KHTML, like Gecko) Version/3.0 Mobile/4A93 Safari/419.3" INSERTURL

Replace INSERTURL with the copied link you got to page 1, then delete back to the underscore and append [1-300].jpg this is a range option to grab pages 1 to 300 and can be adjusted, so the final command will look like this:

curl -O -A "Mozilla/5.0 (iPhone; U; CPU like Mac OS X; en) AppleWebKit/420.1 (KHTML, like Gecko) Version/3.0 Mobile/4A93 Safari/419.3" http://imgs.zinio.com/iphone/issues/416078746/[1-300].jpg

The files will need to be renamed, as sadly they won't sort correctly if you are going to do the next step of combining them into a single pdf. We need the jpgs numbering from 001.jpg so they order correctly. this can be achieved in a variety of ways, using Thunar rename to insert the necessary 0's in two stages is one simple way, insert 00 at position 10 for number 1-9, and insert 0 into postion 10 for pages 10-99. it can also be scripted in a couple of steps with :

for i in `seq 1 9`; do mv *_$i.jpg 00$i.jpg ;done

for i in `seq 10 99`; do mv *_$i.jpg 0$i.jpg ;done

This could of course be scripted into one single command using a bash script.

Then we can simply issue the command:

convert *.jpg magazine.pdf

Thats it, you now have a local copy of the magazine in a handy PDF format relatively simply, it lokos more complex than it really is once you get your head around it.

Friday, 29 May 2009

Is your Nautilus slow to open directories?

Fix Naultilus slow loading some directories.

If nautilus is taking an age to load some directories on your computer then you may have Assistive Technologies enabled.

Simply go to the System menu on your desktop and then in Preferences. Click on Assistive Technologies.
Untick the box marked "Enable Assistive Technologies" and choose "Close and Log Out" at the bottom of the window.

When you log back in Nautilus should be opening directories instantly again. Apparently this became an issue in 8.10 when Assistive technologies was enabled by default, I only spent aoround 8 months suffering with this before getting off my backside and finding a fix, it is disappointing that there has not been a direct update to sort this out, there must be a lot of people stuck with this problem.

Wednesday, 11 February 2009

Disable IPV6 on Ubuntu 8.10

Disable IPV6 on Ubuntu.

Some people feel loading IPV6 can improve the network performance and if your ISP doesn't support IPV6 yet (which most do not) then it will do no harm to disable it.

sudo nano /etc/modprobe.d/blacklistappend the following line:blacklist ipv6

Save the file and restart your machine!
You can verify that ipv6 is actually disabled using the following command:

ip a | grep inet6


If you see no ouput then IPV6 is now disabled.

Tuesday, 10 February 2009

XFCE4 Automatic desktop wallpaper changer.


I recently started using XFCE on my Aspire One. I've always liked XFCE and alternated it with Gnome just for variety. Anyway using XFCE full time made me wish for a method to change the wallpaper every X number of minutes so after some hunting and poking this was the solution for automatic wallpaper changing.

First step is to define a list of wallpapers to use in the normal Desktop settings configuration, I'm notgoing to explain in detail how to do it, its fairly straight forward so go explore.

With that configured then XFCE will load a random wallpaper on each login, very nice but not quite what we want is it.

Well it turns out the solution is simply to reload the desktop on a timed interval. Cron takes care of the timed interval part, and the comand to call is:

export DISPLAY=:0; /usr/bin/xfdesktop -reload

You can try it in a terminal before putting it into a cron job. In case you aren[t familiar with cron it is just a case of doing:

crontab -e

If it is the first time you called it then it may ask you what editor to use, just use nano if available as its the easiest to use imho.

Enter this line into the editor:

0,15,30,45 * * * * export DISPLAY=:0; /usr/bin/xfdesktop -reload



Thank you to Ninjanoh who suggested in the comments that this will work in 11.10 by changing -reload into --reload




Ctrl + o to save the file, then Ctrl + x to exit nano.

The wallpaper should now change on the hour and at 15 minutes, 30 minutes and 45 minutes past the hour.

Tuesday, 16 September 2008

Error trying to mount an external device: mount_point cannot contain the following characters: newline, G_DIR_SEPARATOR (usually /)

The computer fails to mount a device with the following error:
Cannot mount volume.Unable to mount the volume 'yourdevicenamehere'.Detailsmount_point cannot contain the following characters: newline, G_DIR_SEPARATOR (usually /)
This can be from incorrectly setting the mount point by right clicking the drive and choosing Properties then the Drive tab and finally expanding the section for Settings, this should simply contain the name you would like the device to be named on your desktop and NOT a fully qualified pathname such as /media/freecom

If you have incorrectly set this or some other bad voodoo has happened to result in this error then it can at least in some cases be very quickly fixed with the following. Open a terminal and open the Gnome Configuration Editor with this command:

gconf-editor

and navigate to this location in the left hand menu:

system / storage / drives /

If you can now see an entry relating to the problem drive then click it and edit its entry on the right, removing the path and any /'s is normally sufficient , all it should be is a simple name that you would prefer it appear on the desktop as, in my case I was changing a drive that mounted as /media/FREECOM HDD to mount as /media/FREECOMHDD due to X-Plane not liking paths with spaces in. So the correct entry for mine was to just input "FREECOMHDD" with no path, no /'s and no speechmarks! ;)

Monday, 1 September 2008

Linux Pocket Guide by O Reilly


This is a command reference that I have been using for several months now (check your plug-ins if you can't see the image above) that I got off Amazon and it has really earned its keep. using 'man' in the terminal is an excellent source off information if you already know the command but sometimes you just don't know it or even know the facility existed. Don't worry about the "Covers Fedora Linux" if you don't use Fedora, the commands are generic that I have found and nothing has failed to work on my Ubuntu box that I have tried.

Linux Pocket Guideis fantastic as you can just dip into it for clarification on a command syntax for a quick solution (there are many examples on most commands, or you can just read through it as I did when it first arrived, discovering several commands I had no idea were possible. I didn't know for there were dictionary's lookup commands available at the command line (look, aspell, spell) for checking spellings for instance. Try the following as an example of it:

look big

Its extremely useful and helps with checking words on a variety of projects, including this blog. Check out the book, its inexpensive and pocket sized, perfect for taking with you on the odd trip to dip into and refresh, it gets my unreserved approval.

Sunday, 31 August 2008

Install and use ClamAV for linux anti virus

Install Clamav with either Synaptic or apt-get/aptitude.

To update the definitions use:

sudo freshclam

scanning files is as simple then as calling clamscan with the -r or --recursive flag and a path, if the path is omitted then it will scan at the current path:

clamscan -r /home/subbass
or clamscan -r

If you would rather only see infected files then use the -i or --infected flag:

clamscan -ri /home/subbass
or clamscan -ri

If you wish to scan every file on the system you may have to run clamscan with sudo, as running without it clamscan can only read files the user running it can access.

sudo clamscan -ri /

This would check every file on the system recursively and report only infected files.

You can schedule clamscan using cron or for the odd one off scans using the "at" command, such as:
at 3:30 tomorrow
at>clamscan -i /home/user > mail user@example.com
at>
job 3 at 2005-04-28 03:30
This would perform the scan at 3:30am later that night and mail the results to the defined address. To add a regular cron job try the following:

nano crontab -e

Then enter the following line at the bottom of the file

00 00 * * * sudo clamscan -r /location_of_files_or_folders
Save the file and exit.

Use exiftran to transform jpeg images

Exiftran is a command line utility to transform digital image jpeg images. It can do lossless rotations like jpegtran, but unlike jpegtran it cares about the EXIF data: It can rotate images automatically by checking the exif orientation tag, it updates the exif informaton if needed (image dimension, orientation), it also rotates the exif thumbnail. It can process multiple images at once.

exiftran -ai *

This will transform all the images in a folder, rotating them to the correct orientation as defined by the exif data from the camera and replace the original, assuming your camera can sense and write the orientation into exif data.

exiftran -i9 *

Transform the image through 90degrees (to the right) and overwrite the original.

exiftran -i2

Transforms the image through 270degrees (to the left) and overwrite the original.

I have adapted this into two scripts in my nautilus-scripts folder "/home/subbass/.gnome2/nautilus-scripts/" you can make two scripts in this place using the following code and just changing the exiftran command to rotate left or right in each of the scripts.

#!/bin/sh
for arg; do
filetype=`file -i "$arg"`
if [ -n "`echo $filetype | grep -i '.jpg' `" ]; then

exiftran -i9 "$arg"

else
convert -rotate 90 "$arg" "$arg"
fi
done

The convert at the end is to convert other image formats without me requiring another set of scripts, feel free to omit this if desired. Always do a small test before setting any script to work on large numbers of images, I don't want to be held responsible if your exif data gets nuked.

Saturday, 30 August 2008

Use rsync to and from copy files from a remote machine

Assuming the remote machine has SSH successfully installed and working then it is a simple case:

rsync -v -u -a --delete --rsh=ssh --stats username@192.168.0.100:/home/username/remotefile.txt

This will copy files from /home/username/remotefile.txt on the machine at 192.168.0.100

to copy files to that same machine then the command syntax is as follows:

rsync -v -u -a --delete --rsh=ssh --stats localfile.txt username@192.168.0.100:/home/username/

I will do a more in depth backup write up using rsync soon.

Friday, 22 August 2008

Recurse to find files and move them to a location

I just had to move a bunch of files out of individual sub-folders into the parent folder, time consuming to do that 50 or so times so a quick check of the "find" command and the solution is here:

find . -iname '*.avi' -exec mv {} /home/subbass \;

Command breakdown looks like this:

find .
find "here"
-iname '*.avi'
case insensitive name match on *.avi
-exec mv
execute the move command on the matches
{}
the match result from find
/home/subbass/
path to move the files to
\;
end of the -exec, each match runs as a new command

A quick command line, fairly simple syntax and it should prove a great time saver. You could easier of course cp or rm files instead of mv or many other possibilities.

Thursday, 14 August 2008

X server gives error and won't load.

I got asked to look at one my parents PC's a couple days ago as it had 'locked up'. Upon investigation it hadn't locked up but the motherboard had fatally broken with the PS2 and USB ports left lifeless. I was able to SSH into it and the machine was just fine.

I wasn't able to easily get any data off the HD while in the case so popped it out and took it home, plugged it into another of my own PC's and booted it up. GDM failed to come up and I was greeted with the typical "X has failed to start" message and dumped to a prompt. Not a problem, I've been here before and we can fix that in a jiffy.

sudo dpkg-reconfigure xserver-xorg

Go through the various questions, most of which are pretty simple and you can pretty much take the defaults in my experience.

A quick reboot:

sudo shutdown -r now

or a faster restart of gdm (the login manager)

/etc/init.d/gdm restart

Everything should be fine when it comes back up.

Enable DVD playback and other 'restricted' extras.

This information is taken from the Ubuntu Documentation (here) and any copyright remains with them. This is here for my own use.

Playing Restricted Formats in Ubuntu.

Follow these steps to play most common multimedia formats, including MP3, DVD, Flash, Quicktime, WMA and WMV, including both standalone files and content embedded in web pages.

Using the GUI (Synaptic)

  • Go to Applications → Add/Remove...

  • Set Show: to All available applications

  • Search for ubuntu-restricted-extras and install it. Note that there is also xubuntu-restricted-extras (for Xubuntu) and kubuntu-restricted-extras (for Kubuntu.)

Or open the Terminal (much faster), and execute the following command:

sudo apt-get install ubuntu-restricted-extras

Use convert to add a border to multiple images in the command line

Ok, so you you have taken a bunch of photos with your new camera and what do you know, some of them are half decent. I use this after I have copied photo's I want to print or photo's that I am sending to flickr or deviant art to a seperate folder as it really adds a finishing touch, I copy them to a seperate location so I know exactly which ones I am printing/uploading and don't omit any.

Now you could easily do this in The Gimp, load each image and enlarge the canvas followed by a fill and then resave the image. This is linux though and we can do things a heap simpler than that!
First install Imagemagick:

sudo apt-get install imagemagick


Or install it via Synaptic or your package manager.

Then use this simple script,

be aware that you should operate on copies as this does overwrite the original, as noted above I only do this on photo's I have copied for printing/uploading.


for img in `ls *.jpg`

do
convert -bordercolor white -border 50x50 $img $img
done

Easiest to pop it all into a bash script, or just close it up separating the commands with semicolons into a one liner eg.

for img in `ls *.jpg` ; do ; convert -bordercolor white -border 50x50 $img $img ; done

If your camera uses a different extension then adjust the .jpg accordingly.

Adjust "50x50" to whatever you feel adds a nicely sized border, and feel free to change the border colour (black for instance). If you want to get creative stack up the converts to add a thin black border before a larger white border or whatever you fancy.